Izaberite jezik:

rca 380

Home /Sales /rca 380 /rca 380

Firewood Processor RCA 380 enables cutting of logs of diameter up to 38 cm and splitting of sawn logs of length from 20 to 50 cm. With the help of optional log loader DM 1511, the logs are loaded to the infeed conveyor and forwarded to the length limiter to be cut.
The cut log falls into the splitting chute where it is pushed against the 2 or 4 way splitting wedge (6 and 8 way splitting wedge optional) by the splitting cylinder with 150 kN force. The splitting wedges are easy to adjust in order to suit the size of the cut log.

The firewood is discharged through the 4 m conveyor.


Tachnical data RCA 380
Length of Cut Log 20-50 cm
Max. Diameter of Log 10-38 cm
Sawbar Oregon 17", b=1,5mm
Chain 3/8” Oregon MULTICUT
Splitting Force 150 kN (15t)
Width x Height x Length (working position) 610 x 307 (at 45° incline of the conveyor) x 129 cm
Width x Height x Length (transport position) 235 (*232) x 236 (*221) x 129 cm
Weight with Discharge Conveyor 900 kg + 130 kg
Necessary Tractor Capacity 30 kW (60 kW - transport)
Inbound P.T.O. Shaft Speed 430 min-1
Height at 45° incline of the conveyor 307 cm
two stage telescope with automatic hydraulic belt straining  
Length 43 m
Width 43 cm
Speed Continuous Speed Control of the Conveyor Belt
Weight 130 kg
Lifting power 4500 N
Width x Height x Lenght 130 x 90 x 184 cm
Weight 160 kg
RCA 380 E
Power Unit 11 kW; E-motor: 400V/50Hz; 2.910 min-1
Weight with Discharge Conveyor 1.100 kg + 130 kg
Power unit 11 kW; 1.500 min-1
Inbound P.T.O. Shaft Speed 430 min-1
Weight 197 kg